Hypertufa Recipes for Your Projects

Four Easy Recipes To Make Just About Any Garden Art Object

 

Start With One Of These Hypertufa Recipes And Learn The Basics

 

Here are 4 proven, reliable and time-tested hypertufa recipes that will help assure your next project will be headed for a successful outcome. These have been used by scores of hypertufa novices and artisans alike. I’ve also included mixing tips and guidelines to help you cut out any guesswork.

 

There is one “ingredient” missing from these recipes … your expertise. However, the expertise is really rather simple to attain. Obviously, the more experience you have working in hypertufa, the better you will become at knowing when your ingredients are blended to the proper consistency and are ready to be applied to your hypertufa mold.

 

It Takes Just a Little More Skill Than Making a Mud-Pie

 

You’ll do just fine on your very first project by following all the directions, but once again, practice does make perfect. So, through experience you’ll get the hang of:

If you’ve never tried working with hypertufa, then click here for a Beginners Hypertufa Recipe. I really suggest you start with this recipe. It’s a little more affordable because you don’t have to make a big investment in the various ingredients.

 

The following hypertufa recipes have two things in common — Portland cement and peat moss. Also note that the ratios of one ingredient to another may vary in these recipes. Please follow the directions, OK? Thank you. I want you to be successful, remember? 

 

Portland Cement is NOT Concrete

 

I’ll repeat this so you understand fully … Portland cement is NOT concrete! Portland cement is an ingredient of concrete. Concrete is a composite building material made from the combination of aggregate and a cement binder. I don’t want you buying and lugging home the wrong 30lb., or worse, 80 lb. bag of product.

 

Also be aware that Portland cement is available in grey or white. Grey seems to be just fine for most projects. White lends itself well to a granite look — just make sure to use small or medium size perlite in your mix. White would also be your choice if you are using cement/concrete colorants. **Start by adding one cup of powdered colorant to the dry ingredients and mix thoroughly.

4 Proven Hypertufa Recipes

 

Learn to Make These & Then Tweak To Your Heart’s Content 🙂

 

Note: “Part” = whatever container you are using to measure the dry ingredients. Use the same size container for all ingredients! This keeps the proper ratio needed for each recipe.

 

Basic Hypertufa Recipe A
1 part Portland cement
1½ parts peat
1½ parts perlite

This recipe is suggested if you want the ability to carve a pattern or design into the ‘tufa. It is workable while still quite damp. This would also be a good basic “granite look” recipe. (Use white Portland cement.)

 

Basic Hypertufa Recipe B
1 part Portland cement
1½ parts peat
1½ parts vermiculite

Vermiculite, instead of perlite, will add a little extra weight to your object. There is also a little sparkle to the vermiculite, which can be a nice touch. This recipe is also carvable as the one above.

 

Hypertufa Recipe For Added Strength
1 part Portland cement
1 part sand
1 part peat
1 part perlite or vermiculite

Note this is using an equal ratio of all ingredients. This mixture will give you a stronger ‘tufa. It will be a bit heavier than the first 2 recipes. Your choice of sand (textures vary here, too) will affect the final coloration of your object.

 

Hypertufa Recipe With Fiber Mesh For Added Strength
2 parts Portland cement
2 parts perlite
1½ parts peat moss (or you can try a hypertufa recipe using coir as a substitute for peat moss)
½ part coarse sand
1 large handful nylon fiber mesh

Please be aware that the fiber mesh product might be a bit hard to find in your area. 

 

You may get a blank stare from the sales clerk when you ask for it. It’s used in commercial concrete applications, so … if you’re having trouble finding some, seek out your local ready-mix concrete company. They should have the fiber mesh already bagged, available to sell for about $10/bag. One bag will last you a looooong time.

 

In case you’ve not yet read Hypertufa Safety Guidelines please read it before you even think of starting to mix up any hypertufa recipe! Thank you.

 
Scroll to Top